Bending products are also relatively common. Many mold designers do not understand the principle of arc core pulling. Let me share with you:
1. The arc core-pulling stroke is relatively large, and an oil cylinder is required for core-pulling.
2. For arc core pulling, the slider insert needs to be divided into several pieces, and the core is pulled along the arc of the product when pulling the core.
3. The slider inserts are connected with a key and positioned with a pin,
4. The position of the key in the slider insert must be avoided to avoid interference between the key and the slider insert during arc core pulling.
5. Positioning must be done between the slider inserts to facilitate smooth mold clamping without misalignment
